Desco - Continuous Mini Monitor

Desco - Continuous Mini Monitor

Desco - Mini Monitor

Desco - Continuous Mini Monitor

  • 36-19239
  • Desco
  • Call Customer Service
  • Call Customer Service
  • Single Workstation Continuous Monitor - Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface
  • IMPROVED Operator Alarm - Alarms when the operator unintentionally disconnects from the monitor or the connection between the banana plug and monitor’s jack is intermittent
  • Desco Wave Distortion Technology - Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground* and the presence of its 1 megohm safety resistor
  • Park Snap - Allows the operator to disconnect (and park) a wrist strap when leaving the workstation without creating a false alarm
  • Single-Wire Impedance Design - Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
  • 1.2 Volt Operator Test Voltage - Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
  • <50 Millisecond Alarm Response Time - Identifies failures and intermittencies that inferior technologies miss
  • Continuous Visual and Audible Alarms - Illuminates green to indicate proper grounding; illuminates red and sounds audible alarm when intermittent or failed connection occurs
  • Calibration Verification - Use the Desco 98220 Monitor Calibration Unit to check the test limits of Wave Distortion Monitors without removing them from their workstations
  • NIST Calibrated with Certificate Included - Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration.
  • 100-240VAC Power Adapter with North American Plug - Works with standard electrical systems in North America, Japan and Asia
  • Made in the United States of America - This item is made and stocked in Chino, CA



*The ESDA Wrist Strap standard is ANSI/ESD S1.1. The Wrist Strap System required limit per ANSI/ESD S20.20 Table 3 is 0.8 to 1.2 x 106  ohms with product qualification testing per ANSI/ESD S1.1. Test the range of the monitored circuit is 500 kilohms to 10 megohms.