Eubanks - Model 4850, Semi-Automatic, Pneumatic Wire Stripper - Bench Top, 8 Wire

Eubanks - Model 4850, Semi-Automatic, Pneumatic Wire Stripper - Bench Top, 8 Wire

Eubanks - Model 4850, Semi-Automatic, Pneumatic Wire Stripper - Bench Top, 8 Wire

Eubanks - Model 4850, Semi-Automatic, Pneumatic Wire Stripper - Bench Top, 8 Wire

  • Eubanks
  • 130-Model-4850
Some equipment is not available in all areas. Please contact your Customer Service Representative at (800) 405-1730 or email orders@murraypercival.com for more details.
The Super 8 is a bench-mounted stripper that can be equipped to strip eight different wire sizes, each with a different strip length. This means that the machine can be ready at any time to handle most (per haps all) of your most commonly used wire sizes - 12 to 26 AWG, for example. Or perhaps you will want to equip it to strip coaxial cable at two points plus six single conductor wires.

The Super 8 is ideal for stripping the ends of a harness with several different wire sizes, or the wires in a multi-conductor cable. It requires free wire (the length between your finger tips and the end of the wire) of only 1 3/8" plus the strip length. For example, with a strip length of 1/4" your first tie could be as close as 1 5/8" to the wire ends.
Wire Insulation Diameter: .030"-.225" (0.8 mm - 5.7 mm)
Strip Lengths: Infinitely adjustable from 3/32 "- 1 1/8" (2.4 mm-28 mm)
Free Wire Length Required: 1 3/8" (36 mm) plus strip length
Stripping Blades: Standard pdf die-type blades
Wire Types: Will strip PVC, Teflon, Kapton, Kynar Raychem, Mil-Ene, rubber, fiberglass, and other wrapped or extruded materials.
Wire Sizes: 10-26 AWG stranded (5.0 mm2-.125 mm2). 12-26 AWG solid (3.0 mm2-.125 mm2). Coaxial cable to .225" 0. D. (5.7 mm). Parallel conductor wire with largest dimension to .225" (5.7 mm). Special tooling required.
Cycle Time: Approximately 1 second including insertion and withdrawal. Compressed air at 60 psi (42 kg/cm2). Will operate between 40 psi and 80 psi (2.8- 5.6 kg/cm2). Does not require electric power.
Tooling: Each wire size, including differences in conductor and/or insulation diameters, requires a separate blade/ clamp/guide bushing set Blades are standard pdf die-type blades.
Dimension: 11 3/8" W x 6" H x 14" D (289 mm W x 152 mm H x 356 mm D)
Weight: Net weight 38 lbs (17 kg). Shipping weight 46 lbs (21 kg).
How To Order Tooling A separate blade/clamp/guide bushing set is required for each wire size. Wires of the same gage (conductor diameter) but with different insulation diameters will require separate sets. In ordering a machine, please supply wire AWG size (or area in mm2) and state whether wire is stranded or solid.
 Download Technical Datasheet